ENFORCER
®
High-Speed Latching Continuity Tester
2
SECO-LARM
®
U.S.A., Inc
Introduction:
The ENFORCER ST-BL01Q
High-Speed Latching Continuity Tester allows testing of continuity
over durations as low as 100µs. Excellent for troubleshooting sensitive security systems,
automotive electrical systems, and more.
Overview:
1.
Indicator Switch
-
LED + Beeper
-
LED
-
OFF (Store in this position)
2.
Headlight Switch
-
Turn LED light ON/OFF
3.
Reset Button
-
Use to reset tester while in latch
mode.
4.
Headlight LED
5.
Input Jack
-
Do not connect to a live circuit
6.
Power Indicator LED
-
ON: Power on
-
Flashing: Low battery
7.
Test Mode Switch
-
Real-time
-
Auto reset
-
Latch
8.
Circuit Type
-
N.O. for Normally Open circuits
-
N.C. for Normally Closed circuits
9.
Trigger LED
-
When lit, circuit is continuous
Specifications:
Response time
100µs
Continuity threshold
3kΩ
Power
9-Volt battery (included)
Weight
3.5-oz (99g)
5.1-oz (144g) including 9-Volt battery
Dimensions
4
3
/
16
”x3”x1
1
/
16
” (105x75x27 mm)
IMPORTANT NOTES:
1.
Do not perform tests on live or powered circuits. Performing tests on live or powered
circuits will damage the tester.
2.
Do not use the tester to test voltage. The tester can only test continuity.
3.
Always turn the tester OFF after use to prevent draining the battery. (See above)
Using the Tester:
Power LED
Low Battery
Test Mode
Beeper
Visual
Power (OFF)
Real-time
Auto-reset
Latch mode
Headlight Switch
On
Off
Circuit Type
N.O.
N.C.
Triggered
Reset Button
Latching Continuity Tester
ST-BL01Q
WARNING: DO NOT
PERFORM TESTS ON LIVE
CIRCUITS.
Set Test Mode
NOTE:
Continuity must be detected for at least 100µs to trigger.
Real-time:
Tester will indicate
whenever it is triggered.
Auto reset:
Tester will
indicate continuously for 1
second after it is triggered.
Latch:
Tester will indicate
continuously after triggered,
until reset button is pressed.
Beeper
Visual
Power (OFF)
Latch mode
Auto-reset
Real-time
Headlight Switch
WARNING: DO NOT
PERFORM TESTS ON LIVE
CIRCUITS
Set Indication Type
Beeper:
When triggered,
beeper will sound and
Triggered LED will light.
Visual:
When triggered,
Triggered LED will light.
Power (OFF):
Always
turn tester OFF after use.
Beeper
Visual
Power (OFF)
Latch mode
Auto-reset
Real-time
Headlight Switch
WARNING: DO NOT
PERFORM TESTS ON LIVE
CIRCUITS
