ENFORCER
®
SLI 840/840-4 Owner's Manual
Page 4
SECO-LARM U.S.A., Inc.
ARMING
There are two different ways to arm your
alarm. Tell your dealer which is best for you:
q
Active Arming
Turn your ignition OFF.
Close all the doors. Then
press the Lock button. If
the siren chirps and parking
lights flash once, the alarm is
fully armed.
If the siren chirps 3 times, the alarm is
either waiting for the vehicle's delayed
domelights to turn OFF (if your vehicle is
so equipped), or it is telling you that one of
the alarm's zones (a door, or the hood or
trunk) is either open or is not functioning
properly. (See ZONE BYPASS, page 5).
Also, check to make sure your car's
domelight switch was not left in the ON
position.
q
Passive arming
Turn the ignition OFF, and open a door to
exit the car. When the last door is closed
(and the domelight turns OFF, if your car
has delayed domelights), the siren chirps
and the parking lights flash once. The LED
flashes quickly during the 30-second
arming countdown, after which the siren
chirps and parking lights flash once more
to confirm the alarm is completely armed.
If you wish, you can open a door during
the arming countdown, and keep it open
for as long as needed. The LED turns OFF
while the door is opened. Close the last
door, and the siren will chirp and parking
lights flash once to show the 30-second
arming countdown has started again. The
LED will also begin to flash quickly again.
If you close the last open door, and the siren
does not chirp and parking lights do not flash,
you know that one or more openings are not
closed properly. This is SECO-LARM's
patented Quick and Quiet Testing (Q.Q.T.),
and it prevents you from thinking your alarm is
armed when it may not be. In this case, double-
check that all the doors, as well as the hood
and trunk, are closed properly, and that your
vehicle's domelights are OFF. If you cannot
locate the problem, but need to arm the
alarm, then press the Lock button to
immediately arm the alarm and bypass
whatever zone is open (see ZONE BYPASS,
page 5).
Door Locks — The system can be
programmed to automatically lock the doors
when armed. Ask your dealer.
NOTE — Under passive arming, you can force
your alarm to arm immediately any time
during the 30-second arming countdown by
pressing the Lock button.
NOTE — Make sure your car's domelight
switch is not in the ON position when you arm
your alarm either actively or passively. The
alarm may not arm properly if the domelight
switch is left ON.
NOTE — There are references to opening or
closing a door throughout this manual. "Door"
also includes your hood and trunk, if they are
protected. Ask your dealer.
ARMED
When the 30-second arming countdown ends, or when the Lock
button is pressed, the siren chirps and parking lights flash once,
and the LED starts flashing to show the alarm is armed.
