ENFORCER
®
SLI 840/840-4 Owner's Manual
Page 9
With this optional feature, while your alarm is
armed, your car will not start, even if a thief
has your keys.
Your alarm also has Automatic Starter Disable
(ASD). If your alarm is set for active arming,
and you do not arm your alarm, ASD
automatically engages the starter disable 10
minutes after you turned the ignition switch
OFF. The LED stays ON constantly to show
ASD is engaged. Once engaged, you must
press the Lock button to disengage ASD before
the car will start. (Programmable — ask your
dealer.)
STARTER DISABLE
With this optional feature, whenever you
disarm the alarm, your car’s domelights turn
ON for 30 seconds. This helps find your car
at night and make sure no one is hiding in it.
If the alarm is triggered, your car’s domelights
will continuously flash.
2nd CHANNEL OUTPUT
DOMELIGHT SUPERVISION
Your transmitter has an extra channel to
control optional accessories.
2nd channel is commonly used to "pop" the
trunk. To use, press the Auxiliary (*) button for
two seconds, either while the ignition is ON
and any door is opened, or while the ignition
is OFF. The alarm will disarm first to prevent
the siren from sounding. (NOTE — If no
doors are connected directly to your alarm, the
2nd channel will not operate with the ignition
ON. Ask your dealer for details.)
With this optional feature, your alarm can
automatically lock the doors when armed and
unlock the doors when disarmed. The doors
lock when you press the Lock button and
unlock when you press the Unlock button.
For extra security, they lock automatically if the
alarm is triggered. (Exception — See
EMERGENCY CALL FOR HELP, page 5.)
Your alarm can be programmed for ignition-
controlled operation (doors lock when you turn
the ignition ON, and/or unlock when the
ignition is turned OFF). It can also be
programmed to lock the doors every time the
alarm passively arms (be careful not to leave the
keys and transmitters in the car, though!).
Ask your dealer.
POWER DOOR LOCKS