background image

ENFORCER Voice Dialer 

2

 

SECO-LARM U.S.A., Inc. 

 

 

 

 

 

Features:  

 

Trigger-activated alarm and dialer with user-programmable 20-second alarm message 

 

16-Digit large display with date/time and function icons 

 

3 Triggers (1 N.C., 2 NO/NC) for multiple zone security 

 

Call in at any time to listen in to room, broadcast to room, arm, and disarm dialer 

 

Listen in, broadcast messages to room, and/or disarm during dialer call out 

 

Programmable PIN number and entry delay timing 

 

5 Programmable emergency telephone numbers (up to 32 digits each) 

 

Programmable auto-dialing cycle repeat times 

 

Home mode function (acts as a door chime when user is at home)   

 

Panic button 

 

Back-lit keypad 

 

Built-in flash memory to protect against system data loss in case of power failure 

 

Touch-Tone dialing  

 

Low-battery indicator for backup battery (battery not included) 

 

DC power input jack (power adapter not included) 

 

9V battery backup (battery not included) 

 

Wall-mountable 

 

Built-in 105dB alarm (with programmable alarm on/off) 

 

Built-in auxiliary output for external alarm or siren 

 

Built-in line seizure 

Table of Contents:  

Features ......................................................... 2 
Parts List ......................................................... 3 
Specifications ................................................. 3 
Wiring Diagram ............................................... 3 
Overview .........................................................  4 
LCD Screen Layout ........................................ 4 
Installing the Voice Dialer ........................... 4~5 
Programming the Voice Dialer .................... 6~9 

Setting and Changing the PIN Number ...... 6 
Setting Emergency Phone Numbers ...... 6~7 
Deleting a Stored Phone Number ............... 7 
Setting the Siren Function .......................... 7 
Setting the Auto Dial Function .................... 8 
Setting the Number of Auto Dial Cycles ..... 8 
Setting the Number of Call-in Rings ........... 8 
Setting the Entry Delay Time ...................... 9  
Setting the Date and Time .......................... 9 

Record and Play Back Emergency 
Message ..................................................... 9 

Testing the Auto Dial Function ...................... 10 
Resetting the Voice Dialer ............................ 10 
Line Seizure .................................................. 10 
Operating the Voice Dialer ...................... 10~13 

Arming and Disarming the System ..... 10~11 
Panic Button Use ...................................... 11 
Remote Control by Telephone ............ 11~12 
Home Mode Use ....................................... 13 
Low-Battery Indicator ................................ 13 
View Function ........................................... 13 

Tips ............................................................... 13 
Program Planner ........................................... 14 
FCC Part 68 .................................................. 14 
Summary Programming/Operation Chart ..... 15 
Also Available from

 

SECO-LARM

®

 ........ 15 

Troubleshooting ............................................ 16 

Summary of Contents for E-921CPQ

















Reviews: