ENFORCER Wireless Video Door Phone
SECO-LARM U.S.A., Inc.
7
Installation – Monitor
(continued)
:
ON/OFF
Recharge the monitor battery:
There are two ways to recharge the monitor battery.
1.
Place the
monitor into
the monitor
charger stand
and plug the
charger into
the stand.
2.
Plug the charger directly into the monitor.
Turn monitor ON:
Hold the “ON/OFF” button for 3 seconds. The monitor will turn
ON with the ENFORCER screen.
Standby mode:
If the monitor is on, press the “ON/OFF” button momentarily to
go to standby mode (if the display is ON) or to leave standby
mode (if the display is OFF).
The red indicator LED will flash once every three seconds in
standby mode.
Battery saver:
If the display is ON and there is no user action for 35 seconds,
the display will turn OFF and the monitor will go into standby
mode.
Low battery:
When the battery is low (indicated by 1 or 0 bars on the
display’s battery icon), the red indicator LED will start to flash
once per second.
Turn monitor OFF:
While the monitor’s display is ON, hold the “ON/OFF” button
for 3 seconds and the monitor will turn OFF.
Standby/
Low
battery
indicator
Battery
level
indicator
