ENFORCER Wireless Video Door Phone
10
SECO-LARM U.S.A., Inc.
Adjust the monitor’s color tint:
1.
Press the “ON/OFF” button to turn the monitor’s
display ON.
2.
Press the monitor’s “View” button to turn the
camera on.
3.
While the camera’s image is displayed, press the up
and down arrows on the front of the monitor to turn
the brightness up and down.
4.
Press the monitor’s “View” button to save the
brightness setting and turn the camera off.
Access the photo gallery:
1.
The monitor can be used to view up to 100 photos that have been captured by the camera,
and to delete photos no longer needed.
2.
Press the “ON/OFF” button to turn the monitor’s display ON.
3.
Press and hold the down arrow on the front of the monitor 3 seconds until the letter “P” and the
number of stored photos show on the top of the screen.
4.
Press the up and down arrows on the front of the monitor to view the captured photos.
5.
To delete a photo:
a.
Press the “Photo/Settings” button.
b.
Press the up and down arrows on the front of the monitor to select “Y” (yes, delete),
“N” (no, do not delete), or “ALL” (delete all photos).
c.
Press the “Talk” button to select. If “Y” is selected, the photo will be deleted.
NOTE: Monitor will automatically delete the oldest photo when full.
NOTE: It is not possible to export internal photos.
NOTE: By default, the monitor in the DP-236Q Complete Kit is paired with the camera. These
instructions apply to pairing a second or third monitor.
To pair a monitor with the camera:
1.
Disable the tamper alarm:
a.
Remove the camera from the bracket.
b.
The tamper alarm will now sound. Press the “Talk” button on the already-paired
monitor repeatedly to disable the tamper alarm.
2.
Pair the new monitor to the camera:
a.
Turn on the monitor to be paired by holding the “ON/OFF” button for three seconds.
b.
Quickly press the “ON/OFF” button three times. The screen will display “Pairing” for
about 15 seconds. The monitor will allow pairing only once per bootup, so you may
need to power it OFF and ON again if the attempt fails.
3.
Pair the camera to the new monitor:
a.
While the monitor displays “Pairing”, use a paperclip or other small object to press the
camera’s reset button twice.
b.
Two or three beeps confirm the pairing of the second or third monitor respectively.
4.
Return the camera to the bracket:
a.
Mount the camera in the bracket.
b.
Press the doorbell button on the camera to test the connection.
Talk
View
Photo/Settings
Arrow
Buttons
Pairing Additional Monitors:
Operating the Wireless Video Door Phone
(continued)
:
