ENFORCER 200H
Owner's Manual
ENFORCER 200H
Owner's Manual
TABLE OF CONTENTS
Transmitter Functions ...................... 3
Arming .......................................... 4
Armed ........................................... 4
Zone Bypass ................................... 5
Sensor Bypass ................................ 5
Emergency Call for Help (Panic) ...... 5
Total Protection ............................... 6
Disarming ...................................... 6
Emergency Disarm ......................... 6
Chirp Delete (Silent arm/disarm) ..... 7
Valet .............................................. 7
Dual-stage Shock Sensor ................ 7
ANTI-CARJACK Protection ............... 8
2nd Channel Output ...................... 9
Power Door Locks ........................... 9
Starter Disable ............................. 10
Tamper Indicator .......................... 10
Appendix 1 — Understanding the
Siren Chirps & Light Flashes ........... 10
Appendix 2 — Understanding the
LED Flashes .................................. 11
Appendix 3 — Programmable
Features ....................................... 11
Accessories .................................. 12
1. Press transmitter button #1 to:
Arm and disarm the alarm.
Turn the siren ON (and shut it OFF) in
an emergency.
Lock/unlock power door locks.
Bypass an open zone.
2. Press transmitter button #2 to:
Operate channel 2 (such as popping
the trunk or rolling up the windows).
Silently arm or disarm the alarm.
Bypass the alarm’s sensors.
TRANSMITTER FUNCTIONS
Appendix 1 — UNDERSTANDING THE
SIREN CHIRPS AND LIGHT FLASHES
A.
1 chirp/flash
:
When transmitter button #1 is
pressed, the alarm is armed.
When a door is closed, the alarm will
arm in 30 sec. (passive arming).
30 sec. after ignition switch is turned
OFF and all doors are closed (or
delayed domelights turn OFF), the
alarm is armed (passive arming).
Successfully entered the valet mode.
B.
2 chirps/flashes
:
When transmitter button #1 is
pressed, the alarm is disarmed.
Successfully exited the valet mode.
C.
3 chirps/flashes
:
Pre-intrusion warns potential thieves or
vandals who trigger the first stage of
any dual-stage sensor that your car is
protected by an alarm.
When pressing transmitter button #1
to arm the alarm, indicates the alarm
arms even though it is not set properly
(door not closed, or broken switch, or
domelight is still ON, see ZONE BYPASS
on page 5).
When pressing transmitter button #1
then #2, indicates sensor bypassed
(see SENSOR BYPASS on page 5).
Completed emergency disarm.
D.
4 chirps/flashes
:
When the alarm is disarmed, indicates
the alarm was triggered while you
were away.
When transmitter button #1 is
pressed, indicates the alarm in valet
(flashes only, no chirps).
E.
Continuous chirps/flashes
— ANTI-
CARJACK mode triggered, stage 2. (For
details, see page 8.)
NOTE — The chirps for arm, disarm, pre-
intrusion, zone bypass, sensor bypass,
emergency disarm, valet, and tamper can be
deleted (see CHIRP DELETE, page 7).
Page 10
Page 3
SECO-LARM U.S.A., Inc.
Button #1
Button #2
With this optional feature, while your alarm is
armed, your car will not start, even if a thief
has your keys.
STARTER DISABLE
If your alarm was triggered when you were
away, the siren will chirp four times and the
parking lights flash four times then turn ON
for 6 seconds when you disarm your alarm.
These "memory" flashes automatically reset
when the ignition is turned ON.
TAMPER INDICATOR