ENFORCER 200H
Owner's Manual
ENFORCER 200H
Owner's Manual
CONGRATULATIONS
From the moment you purchased this ENFORCER Vehicle Security System, you became a part of the
SECO-LARM family. You started taking advantage of over 29 years of advanced engineering. You
joined a team of engineers, technicians, designers, and people like yourself who know how
important protecting your car is. You discovered the SECO-LARM difference.
This difference is important because the ENFORCER is more than just an alarm. It is a complete
security and convenience system. It is like having your personal security guard and butler on call in
your car, 24 hours a day.
Keep in mind that the best security systems will not work properly without careful installation.
Therefore, the ENFORCER is designed for installation by your professional SECO-LARM dealer. He
understands both his alarms and your needs, and will work hard to ensure the ENFORCER does its
job for you. Welcome to the family: SECO-LARM, your dealer, and you!
IMPORTANT
This ENFORCER security system contains many innovative features and unique functions. Please
read this Owners Manual carefully in order to understand all of this alarm’s security and convenience
features. Some features may require the addition of sensors or accessories not included with this
alarm. Please consult your professional SECO-LARM dealer.
NOTICE
The information and specifications printed in this manual are current at the time of publication.
However, the SECO-LARM policy is one of continual development and improvement. For this reason,
SECO-LARM reserves the right to change specifications without notice. SECO-LARM is also not
responsible for misprints or typographical errors.
Copyright © 1999 SECO-LARM
®
U.S.A., Inc. All rights reserved. This material may not be
reproduced or copied, in whole or in part, without the written permission of SECO-LARM. This
vehicle security system is protected by patents in the U.S.A., Great Britain, Germany, Hungary,
Taiwan, China, Japan, and Korea. Other U.S.A. and international patents are pending.
INSTRUCTIONS TO THE USER
This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of more of the following
measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
This equipment has been certified to comply with the limits for a class B computing device, pursuant
to FCC Rules. In order to maintain compliance with FCC regulations, shielded cables must be used
with this equipment. Operation with non-approved equipment or unshielded cables is likely to result
in interference to radio and TV reception. The user is cautioned that changes and modifications
made to the equipment without the approval of manufacturer could void the user's authority to
operate this equipment.
This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
that may be received, including interference that may cause undesired operation.
Appendix 2 — UNDERSTANDING THE LED
FLASHES
A.
Armed indicator
— Flashes when the
alarm is armed.
B.
Disarmed indicator
— OFF when the
alarm is disarmed.
C.
RF reception indicator
— ON while
transmitter button is pressed.
G.
Valet mode indicator
— Flashes slowly if
the ignition switch is turned OFF (no flash
if the ignition is ON).
H.
ANTI-CARJACK indicator
— Steady
ON, starting when the ANTI-CARJACK
mode has been triggered. (Please see
page 8 for details.)
Programmable features allow you to
customize your alarm. Your dealer can
program them when the alarm is installed.
Passive/active arming
— In passive
arming, the alarm arms itself when you
turn the ignition OFF and close the last
open door. In active arming, press
transmitter button #1 to arm the alarm.
Permanent chirp delete
— Permanently
enables or disables the siren’s chirps.
Manual/auto door locks in passive
arming mode
— If your alarm is set for
passive arming, it can be set to lock the
doors automatically when it arms (don’t
forget to take your keys!) or you must
press transmitter button #1 to lock doors.
Ignition-controlled door locks
— The
doors can be set to automatically lock/
unlock when ignition is turned ON/OFF.
ANTI-CARJACK mode enabled/
disabled
— Allows the ANTI-CARJACK
mode to be available for use, or
permanently turned off. (Please see page
8 for details.)
Permanent disarm or auto rearm in
active mode
— If your alarm is set for
active arming, choose whether it will
completely disarm when you press
transmitter button #1, or rearm
automatically if you do not open a door
within a certain time.
Appendix 3 — PROGRAMMABLE FEATURES
Page 11
Page 2
SECO-LARM U.S.A., Inc.
