www.agelectronica.com www.agelectronica.com
www.agelectronica.com www.agelectronica.com
Enfora Enabler IIIG M2M
Modem Integration Guide
13.8.1. OEM Responsibilities for All Products Containing the Enabler IIIG module
In addition to any other regulatory requirements, OEMs and integrators must include or provide
the following information, instructions, warnings and labels with any device or product into which
the Enfora Enabler IIIG GSM1900 GSM transceiver has been incorporated:
Information
Description
Detailed
Operating
Instructions
for
ensuring
compliance with
current FCC
guidelines which
limit human
exposure to radio
frequency
radiation
The OEM must provide an operating/installation manual with the final product which clearly
indicates that these operating conditions and restrictions must be observed at all times to
ensure compliance with current FCC guidelines which limit human exposure to radio
frequency radiation.
20 cm (7.87 inch) separation distance between the antenna and all persons must be
maintained at all times for all fixed and mobile products and applications
Portable devices and applications are prohibited unless such devices and products are
specifically authorized by the FCC
Maximum antenna gain is limited to 2 dBi* in mobile products and applications
For fixed applications (2 meter separation) the antenna gain can be as much as 26 dBi.
Modifications and/or additions to the Enfora Enabler IIIG GSM transceiver, including use of
antennas with higher gain than those authorized by the FCC, are prohibited
*dBi = antenna gain in dB relative to an isotropic radiator
Antenna
Avoidance
Label
Attach the following warning label
directly to or displayed next to the
antenna. Furthermore, this label must
be visible to and easily readable by all
persons in the immediate vicinity of the
antenna
WARNING
To comply with FCC RF exposure
requirements, a separation distance of 20 cm
(7.87”) or more must be maintained between
this antenna and all persons
Human Exposure
Compliance
Statement
Include the following statement in the
instruction / operation manual.
Enfora certifies that the Enfora Enabler IIIG ™
MHz GSM Radio Module (FCC ID: MIVGSM0308)
complies with the RF hazard requirements
applicable to broadband PCS equipment
operating under the authority of 47 CFR Part 22 or
Part 24, Subpart E of the FCC Rules and
Regulations.
This certification is contingent upon installation,
operation and use of the
Enfora Enabler IIIG module and its host product in
accordance with all instructions provided to both
the OEM and end used. When installed and
operated in a manner consistent with the
instructions provided, the Enfora Enabler IIIG
module meets the maximum permissible exposure
(MPE) limits for general population / uncontrolled
exposure at defined in Section 1.1310 of the FCC
Rules and Regulations.
GSM0308IG002
79
Version 1.05 – 11/13/08