1
Modem Setup Guide
– NBN FTTP
Netgear Nighthawk D7800
Please follow the steps below to set up your Netgear Nighthawk D7800.
1.
Ensure your
NBN Connection Box
is turned on.
2.
Plug an Ethernet cable from the
UNI-D1 port
on your NBN Connection Box into the
red
Internet port
on your Nighthawk modem.
If UNI-
D1 doesn’t work, try each UNI-D port.
3.
Plug in the power cable and turn your Nighthawk modem on using the
Power
button.
4.
You can connect devices such as PC desktops, laptops or gaming consoles by plugging
Ethernet cables from the device to any of the four
yellow LAN ports
, or you can connect
devices via WiFi.
5.
