Integration Guide
Version 1.11
GSM0000PB001
Page 47
1.11 - 4/22/03
2.
Configure the COM port as displayed below.
Figure 21 COM Port Settings
10.1.2
Initialization (AT Command Interface)
In the GSM vocabulary, a call from GSM mobile to the PSTN is called a "mobile-originated call" or "outgoing
call". A call from the fixed network to a GSM mobile is called a "mobile-terminated call" or "incoming call."
In the following examples, “Entry” refers to the application. The following convention describes the
direction of the data exchange:
•
The data exchange from the customer application to the Enfora Enabler-G module is designated as:
Entry
•
The data exchange from the Enfora Enabler-G module to the customer application is designated as:
Response
Note:
With the exception of the +++ command (Online Escape Sequence), all commands must be preceded
by the AT attention code (or command prefix) and terminated by pressing the <CR> character.
In the following examples, the <CR> and <CR><LF> are intentionally omitted for clarity and space.
