9
MODEL: EWB-QUAD24V-R
USER’S MANUAL
6. OPERATION
(CONTINUED)
3-PIN CHARGER POWER RECEPTACLE
This device is used to connect to the charger. When the batteries are charging, this device shuts off your scooter.
LOCK LEVER (see Figure 9)
In order to ensure safety during transportation, there is a lock lever at the front of the scooter.
• Turn clockwise 90° to lock the lever, then the scooter can be moved.
• Turn counter-clockwise 90° to unlock the lever, then the scooter can be driven.
WARNING!
When your scooter is in powered mode, the manual freewheel lever must be in downward
position, i.e. in powered mode, so as to ensure that the brake system is operating normally.
Failure to do so may cause the brake system to fail and cause personal injury.
WARNING!
A wrong connection may cause damage to the charger, connectors and electronics.
7. BATTERY AND CHARGING
Your scooter uses two long-life, 12-volt, deep cycle batteries.
These batteries are sealed and maintenance free.
As they are sealed, there is no need to check the electrolyte (fluid) level.
Deep-cycle batteries are designed to handle a longer and deeper discharge.
Though they are similar in appearance to automotive batteries, they are not interchangeable.
Automotive batteries are not designed to handle a long, deep discharge, and also are unsafe for use in the scooter.
CHARGING YOUR BATTERIES
The battery charger is essential to ensure the long life of your scooter batteries.
This charger charges your scooter's batteries safely, quickly and easily.
WARNING!
Battery posts, terminals, and related accessories contain lead and lead compounds.
Wash your hands after handling.
WARNING!
You must charge your scooter's battery with the supplied off-board battery charger.
Do not use an automotive-type battery charger.