enervent eWind Pinion, Installation Instructions Manual

Page: 97 / 124

97
Professional installation instructions
3
Simultaneously press buttons and once.
eWind info list
Marking
Definition
n0 Normal mode is active
n1 Humidity boosting active
n2 Carbon dioxide boosting active
n3 Heat recovery is active
n4 After-heating with water or electric heater
is active.
n5 Outdoor air preheating with CHG/AGH or
with electric preheater is active.
n6 CG, CHG or AGH cooling of the supply air is
active.
n7 Cold recovery with the rotating heat
exchanger is active.
n8 Manual boosting active.
n9 Away mode is active
n10 Humidity removal with rotor is active
n11 Defrosting is active
n12 Eco mode is active
n13 Service reminder; the time remaining for
the next filter replacement in days
n14 Device is starting
1
Simultaneously press buttons and once.
• Parameter (n1..nn) is displayed.
2
Browse the Info list, using buttons and .
Return to the standard view:
eWind info list
Opening:
Data screen
You can view the active functions in the eWind info list displayed on the operating panel.
If you do not press any button, the menu will close
after 5 minutes and the panel will return to the
standard display.
FOR YOUR INFORMATION