enervent eWind Pelican, Operating And Maintenance Instructions Manual

Page: 78 / 100

78
USING THE VENTILATION UNIT
Button/display Description
Mode display Current operation mode
Temperature display Supply air target temperature
Mode button Operation mode selection
(parameter browsing)
Eco button Eco mode selection (parameter
browsing)
Temperature button Supply air target temperature
selection
Daily use of the ventilation
The ventilation is adjusted with an easy-to-use control
panel, whose operation is based on actual operating
situations. The operation modes that based on these
situations cover all the ventilation needs of your home.
When you select the operation mode, the operation of
the ventilation unit is changed accordingly. The installer of
the unit sets the operation modes in connection with the
commissioning of the ventilation.
The control panel is normally in standby mode, in which
case the display is dimmed. The unit can be activated by
pressing any button.
eWind control panel
eWind control panel
When the ventilation system has been carefully designed
and installed, it requires only little maintenance by
the user. The user can just relax and enjoy the good
ventilation.
Some functions of the control panel are only
intended for installation or maintenance purposes.
NOTE
1. Mode (standard display) 2. Temperature (standard display) 3. Mode button
4. Eco button 5. Temperature button
Operation modes
1 = Away (when you are not at home)
2 = Home (when you are at home)
3 = Home (when you are at home, boosted ventilation)
4 = Boosted (when the ventilation needs to be boosted
even more)
F-PL = Fireplace mode (when lighting a fire in the
fireplace)
HEAt = Heating on/heating off
Eco = Energy-saving ventilation
PdC = Range hood mode
3
5
4
1
2