Enertronica Santerno SINUS H PROFInet, User Manual

Page: 23 / 34

PROFInet Module SINUS H
23 / 34
7.2.2
Status Word (ZSW1)
Bit Name Value Description
0 RDY_ON
1
Ready for Switch ON
(Operation is available.)
0
Not Ready for Switch OFF
(Operation is not available.)
1 RDY_OPERATION
1
Bit 0 value of the control word (STW1) that has
been input.
0
2 OPERATION
1
Bit 3 value of the control word (STW1) that has
been input.
0
3
Fault Present 1 Fault condition is present at the inverter.
No Fault 0 Fault condition is not present at the inverter.
4
No OFF2 1
Bit 1 value of the control word (STW1) that has
been input.
OFF2 0
5
No OFF3 1
Bit 2 value of the control word (STW1) that has
been input.
OFF3 0
6 SWC_ON_INHIB
1
Switching On inhibited
(Control is not available.)
0
Switching On Not inhibited
(Control is available.)
7
Warning Present 1 Warning condition is present at the inverter.
No Warning Present 0 Warning condition is not present at the inverter.
8
Speed Error within tolerance 1
The motor speed has reached the frequency
reference (“Setpoint value”).
Speed Error out of tolerance 0
The motor speed has not reached the frequency
reference (“Setpoint value”).
9
Control Requested 1
Bit 10 value of the control word (STW1) that has
been input.
No Control Requested 0
10 ABOVE_LIMIT
-
Not supported
11 to 15
- -
Reserved
“bits 0 to 2” and “bit 6” indicate the following communication module status, as explained in <10.
PROFIdrive Status Diagram>.
Status Word Status
xxxx xxxx x1xx x000 “Switching On Inhibited”
xxxx xxxx x0xx x001 “Ready For Switching On”
xxxx xxxx x0xx x011 “Ready For Operation”
xxxx xxxx x0xx x111 “Operation”