^SynOhrMultiSenseKNX-Eng-13.odt, 2014-05-06 Page 11 of 49
SynOhr MultiSense KNX allows the measurement of the humidity.
Sound Level
The measurement of sound pressure takes place via the built-in microphones and is relative to
the selected „room size“ (comp. p. 36).
Light
Measurement
The built-in light measurement is taken in four areas: red, green, blue and white. The
measurement in performed as shown in Picture 7 (clear = white).
Picture 7: Light Measurement
Lighting
Control
Automatic
Control
For each of the three lights (ambience, ring, display) an automatic lighting control depending on
the ambient lighting, can be turned on. Starting from the max. illumination is specified via the
ETS or the internal menu (comp. page 16), will increase the backlight with increasing ambient
light to the maximum.
Display
The intensity of the display backlight can be set by the user in steps from 0 to 100 %. This will be
parameterized by the ETS or the internal menu (comp. page 16). It is also possible to regulate
the brightness of light on the sensor automatically.
Ring
The intensity of the ring illumination of the central speaker button can be specified by the user in
Enertex
®
Bayern GmbH – Ebermannstädter Straße 8 - 91301 Forchheim - [email protected]
