EnerSys Outback Power EnergyCell 1000XLC, Owner'S Manual, Page: 18 / 36

Installation
18
900-0258-01-00 Rev A
7. Check again to be sure batteries are correctly positioned with orientation alternating
between rows. If correct, the support bars attached to front of modules should be
matched, with the center gap between support bars showing where module #2 meets
module #3, and the support bars adjacent to each other (no gap) where modules #1 and
#2 meet as well as where modules #3 and #4 meet.
Figure 11 Check Battery Orientation
No Gap
Gap
No Gap