background image

3

9400000-J0     Rev E

8.  System Startup ...................................................................................................................26

8.1  Check System Connections ..................................................................................................... 26
8.2  Verify AC and Power the Rectifier Shelf ................................................................................... 26
8.3  Triple Check Battery Polarity and Connections ........................................................................ 26
8.4  CXC HP Reset ......................................................................................................................... 26

9.  Operation ............................................................................................................................27

9.1  Main Rectifier States ................................................................................................................ 27
9.2  Main Rectifier Modes ............................................................................................................... 27
9.3  Factory Ranges and Defaults .................................................................................................. 29

10.  Maintenance .....................................................................................................................30

10.1  Replacing a Rectifier Module ................................................................................................. 30
10.2  Fan and Fan Filter Replacement ........................................................................................... 31
10.3  MOV Replacement ................................................................................................................. 35

11.  Acronyms and Definitions ..................................................................................................39
12.  Warranty and Service Information ....................................................................................40

12.1  Technical Support .................................................................................................................. 40
12.2  Warranty Statement ............................................................................................................... 40
12.3  Product Warranty ................................................................................................................... 40
12.4  Battery Warranty .................................................................................................................... 40
12.5  Warranty Claims ..................................................................................................................... 40
12.6  Service Information ................................................................................................................ 40

13.  Certification .......................................................................................................................41

Summary of Contents for alpha Cordex CXRF 48-3.6kW





















































Reviews: