9400000-J0 Rev E
28
9.2.1 Output Voltage Modes
Voltage modes can be thought of as modes that, under software control, can directly adjust the output voltage. The
qualification of “under software control” is made because there are processes that occur in the rectifier that can
change the output voltage that do not adjust the output voltage directly, for example, if the rectifier has reached the
current limit.
Table C lists four output voltage modes and a description of when they are active.
Table C — Output voltage modes
Output Voltage Modes
Active when…
Float
Output voltage is set to the float voltage setting.
Equalize
Output voltage is set to the equalize voltage setting.
Battery Test
Output voltage is set to the battery test voltage setting.
Safe
Output voltage is set to the safe mode voltage setting.
Manual Test
Output voltage can be manually adjusted outside of the standard adjustment ranges.
9.2.2 Output Current/Power Modes
These modes directly affect the output current and power. Table D lists the four output current/power modes and a
description of when they are active.
Table D — Output current/power modes
Output Voltage Modes
Active when…
Temperature foldback mode
Output current and power limit have been reduced because a high temperature has
been detected on the heatsink or internal ambient temperature sensor.
AC foldback mode
Output current and power limits have been reduced because the AC input voltage is
low. This will reduce the risk of tripping an AC breaker due to increased AC current
draw as the AC voltage decreases.
Short circuit foldback mode
Output current limit has been reduced due to a short circuit at the output.
Internal fault foldback mode
Output current limit has been reduced due to an internal fault.
