72
REMOVING THE TUB ASSEMBLY
1. Disconnect the washer from the hot and cold water hoses.
2. Remove the top panel, the console, the front and rear access panels and the front panel.
3. Disconnect the advance rinsing technology hose from the bellows, the detergent outlet and
the siphon break hoses from the outer tub.
4. Remove the drain pump and disconnect the drain sump from the tub.
5. If you are going to replace the front half of the outer tub, remove the bellows and the weight
ring.
6. Remove the small hose from the air bell.
7. Remove the large pulley, the drive motor and the speed control board assembly.
8. Disconnect the bearing ground wire.
mabe CONFIDENTIAL AND PROPRIETARY INFORMATION-NOT FOR PUBLIC DISCLOSURE. July 2006
