75
REMOVING THE TUB ASSEMBLY (cont.)
13. Lift the front half of the tub off the assembly.
CAUTION: Use caution in handling the spin basket. The outer surface is very sharp!
14. Reverse the procedure to reassemble
using the illustration below to show the outer
tub screw tightening sequence.
15. The seal between the (2) tub halves is
placed in the groove of the rear half and can
be lifted out.
16. To remove the spin basket, set the back half of
the outer tub on it’s side, and reinstall the screw that
secured the large pulley to the shaft. Tap the inner
tub out with a rubber hammer.
mabe CONFIDENTIAL AND PROPRIETARY INFORMATION-NOT FOR PUBLIC DISCLOSURE. July 2006
