7.
Outlet Box
ELECTRICAL DIAGRAMS ARE FOR
REFERENCE ONLY. OPTIONAL USE OF ANY
LIGHT KIT SHALL BE UL LISTED AND MARKED
SUITABLE FOR USE WITH THIS FAN.
Figure 12
1. Connect the ground conductor of the
120v supply (this may be a bare wire or
a wire with green insulation) to the green
ground lead(s) of the fan (Figure 12).
When using standard ceiling mounting,
there are two green grounding leads;
one from the ceiling mounting plate and
one from the ball/downrod assembly.
When using Close-to-Ceiling mount-
ing, there is only one green ground lead
from the mounting plate since the ball/
downrod assembly is not used.
2. Connect the fan motor white wire to the
supply white (neutral) wire using a wire
nut (Figure 12).
3. Connect the fan motor black wire to the
supply black (hot) wire using a wire nut
(Figure 12).
4. Turn wire connections upward, spread-
ing them apart so the green (ground)
and white wires will be on one side of
the outlet box and the black and blue
wires will be on the other side, and push
into the outlet box.
EACH WIRE NUT (WIRE CONNECTOR)
SUPPLIED WITH THIS FAN IS DESIGNED
TO ACCEPT UP TO ONE 12 GAUGE
HOUSE WIRE AND TWO WIRES FROM
THIS FAN. IF YOU HAVE LARGER THAN 12
GAUGE HOUSE WIRING OR MORE THAN
ONE HOUSE WIRE TO CONNECT TO THE
FAN WIRING, CONSULT AND ELECTRI-
CIAN FOR THE PROPER SIZE WIRE NUTS
TO USE.
