40
6.5. PassWorD sEtuP PagE
This feature is used for parental control. The password is a 4-digit code.
Password Mode
Set password mode on/off. If set to off, you will not be asked for the password when changing level at
parental control settings.
Password
The default password (1369) is always active even the password has been changed.
7. trouBlEshootINg tIPs
Before calling for service, you can check the following items on symptoms and solutions
≥
7.1. CommoN
no sound or distorted sound:
Ensure that the equipment is connected properly.
Ensure that the input settings for the TV and stereo system are proper.
no Picture:
Ensure that the equipment is connected properly.
Ensure that the input setting for the TV is “video”.
Ensure that the LCD is on.
no Play:
Condensation may have formed: wait about 1 to 2 hours to allow the player to dry out.
The disc is not compatible with the unit (check specifications section in this manual).
The disc may be dirty and require cleaning.
Ensure that the disc is inserted with the label side up.
no reMote control resPonse:
Check the batteries are installed with the correct polarities (+ and -).
The batteries are depleted: replace them with new ones.
Point the remote control unit at the remote control sensor and operate.
Remove the obstacles between the remote control unit and the remote control sensor.
Operate the remote control unit at a distance of not more than 8 meters from the remote control sensor.
no key oPeration (by tHe unit and/or tHe reMote control) is eFFectiVe:
Turn the unit off and then back to on. Alternatively, turn off the unit, disconnect the AC power cord and the
re-connect it (the player may not be operating properly due to lightning, static electricity or some other
external factor).
Enter the current password.
1.
Enter the new password.
2.
Enter the new password again to confirm. The password change will take effect.
3.
4. Press “OK” to exit.
4.
Summary of Contents for DVD Player
Page 1: ...25 Usermanual ...
Page 2: ...26 ...
