ENERGY SISTEM DVD Player, User Manual

Page: 14 / 21

38
6.2. auDIo sEtuP PagE
downMix
This option allows you to set the stereo analog output of your DVD Player.
LT/RT: Select this option if your DVD Player is connected to a Dolby Pro Logic decoder.
Stereo: Select this option when output delivers sound from only the two front speakers.
sPdiF outPut
Set the SPDIF Output according to your optional audio equipment connection.
SPDIF Off: Turns off the SPDIF output.
SPDIF/RAW: If you have connected your DIGITAL AUDIO OUT to a multi-channel decoder/receiver.
SPDIF/PCM: Only if your receiver is not capable of decoding multi-channel audio.
dolby digital
Go to Dolby Digital setup page.
dual Mono
To select the setting that matches the number of speakers you have connected.
Stereo: Left mono sound will send output signals to Left speaker and Right mono sound will send output
signals to Right speaker.
L-Mono: Left mono sound will send output signals to Left speaker and Right speaker.
R-Mono: Right mono sound will send output signals to Left speaker and Right speaker.
Mix-Mono: Left and Right mixed mono sound will send output signals to Left and Right speakers.
dynaMic
To optimize the dynamic sound output high volume outputs are softened, enabling you to watch your
≥
favourite movie without disturbing others.
6.3. VIDEo sEtuP PagE
Sharpness, Brightness, Contrast, Hue, and Saturation: use to set the video quality.
6.4. PrEfErENCE PagE
Some Preference features can be selected only during ‘No Disc’ condition or STOP mode.
tV tyPe
Select the television system that corresponds to your TV: NTSC or PAL.
In order for a DVD disc to play on this Player, the colour system of the Disc, the TV and the DVD Player
should match.
PAL: Select this if the connected TV is PAL system. It will change the video signal of a NTSC disc and output
in PAL format.