12
If You Need Service
Your Energy Sentry Model 9212 has been carefully
assembled and tested at the factory in Loveland, Colo-
rado, USA. Only components having high reliability
and long life have been used in its manufacture. In the
event that a failure does occur, your 9212 has been
designed so household appliances and loads will con-
tinue to function. The only difference is that there will
be no demand control, and high demand peaks can
occur. If a malfunction should occur, you may turn off
the 9212 at the breaker labeled “9212” or “Demand
Controller,” located in the load center (breaker panel).
You may control your demand manually, if desired, to
avoid unnecessary demand peaks as follows:
1.
Heat or cool only those rooms which are occupied
by keeping the thermostat set only while you are
in each room.
2.
When cooking meals, all heating or cooling zones
and water heater should be turned off.
3.
Avoid using appliances simultaneously. For
example, do not use the dryer and the range at the
same time.
4.
You may monitor your highest demand peak on
the utility meter to determine the effectiveness of
manual control.
5.
Since there are no user serviceable parts or
components in the 9212, refer all service to the
installing electrician, authorized Energy Sentry
dealer or distributor, as described in the Warranty.