Fireplace Assembly
Firebrick Installation – Model 2800
Figure 2 shows how to install the firebrick
for Silhouette Model 2800. The “A” bricks
on the sides and back are full bricks – 9"
x
4½"
x 2". They stand vertically in the
firebox and are put in first. The bricks on
the floor are put in next starting in the left
rear. The 2 narrow “C” bricks – 9" x 2" x
2" – are placed on each side in the front.
Next place the cast grate in the center back
of the firebox, and the “B” brick – 7" x 4½" x
2" – in the front. Keep all bricks tight to the
back of the firebox. Next insert the steel
wood retainer in the front of the box, with
the long legs going in front of the bricks on
the floor. This retainer must be in the
fireplace at all times when in operation.
Without this, damage will occur. Next,
insert the “D” brick – 9" x 4½" x 1¼" – in the
brick baffle. The bricks are held in place by
a slot in the back of the firebox.
Firebrick Installation – Model 2850C
Figure 3 shows how to install the firebrick
for Silhouette Model 2850C. The bricks on
the sides and back are full bricks – 9" x 4½"
x 2". They stand vertically in the firebox
and are put in first. The bricks on the floor
are put in next, starting in the front by
sliding the first 2 half bricks – 9" x 2" x 2" –
under the steel wood retainer. Then place
the cast grate over the ash pan opening
and place remaining full bricks to cover the
floor.
BRICK SIZES and QUANTITY
A = 9 x 4 ½ x 2 19
B = 7 x 4 ½ x 2 1
C = 9 x 2 x 2 2
D = 9 x 4 ½ x 1 ¼ 5
E = 9 x 4 x 1 ¼ 1
Figure 2
Figure 3
Rev 06/2007
3
BRICK SIZES and QUANTITY
A = 9 x 4 ½ x 2 19
B = 7 x 4 ½ x 2 1
C = 9 x 2 x 2 2
