ENERGY KINETICS Smart Solar EWRA1, Installation Manual, Page: 4 / 56

EnerWorks Solar Water Heating Appliance
Installation Manual / Energy Kinetics Inc. - Page
4 -
© 2011 EnerWorks Inc.
Appliance must only be installed by an EnerWorks authorized installer or warranty
is void.
Recognize this symbol as an indication of important safety information!
EnerWorks Residential Solar Water Heating Appliances must be installed as
directed by this manual by an EnerWorks authorized dealer or warranty is void.
Before proceeding with installation of the EnerWorks Solar Water Heating
Appliance, make note of Energy Station and Solar Collector serial numbers on the
Product & Installation Registration Form included with the Owner Manual and in
the Appendices.
EnerWorks Solar Water Heating Appliance Installation Manuals:
Selection, Sizing and Site Evaluation
Collector Installation Manual
Pre-Heat Appliance Installation Manual
Single Tank Appliance Installation Manual (USA only)
Controller and Monitor Programming Guide
CARE, HANDLING & STORAGE
EnerWorks Solar Collectors are manufactured with tempered glass. Though
extremely resistant to impact, tempered glass can break if an edge is subjected to
stress. During storage and installation, protect glass edges. Glass breakage is not
covered by warranty.
Store collectors in a dry place, lying flat with glass up, or leaning on long edge with
glass facing out and connections at top. Protect collector from scratches and
damage by placing it on a soft surface such as a blanket or cardboard. When
hoisting collectors to roof, be very careful not to bang glass edge. Collectors must
not be levered over ladder or eave or they may be damaged. Be very careful of
collector connections as they are soft copper and may be easily damaged. A leak-
proof heat transfer fluid loop can only be achieved if collector connections are not
damaged.
Do not store collectors outside with glass face down. Due to EnerWorks’ patented
stagnation-control device, back of collector is not sealed to atmosphere. Rain may
enter collector if it is stored face down. Any damage due to ingress of rain is not
covered by warranty.
It is best to store both the EnerWorks Solar Collectors and the EnerWorks Energy
Station in a cool, dry place.