EnerWorks Solar Water Heating Appliance
© 2011 EnerWorks Inc. - Page
3
-
Energy Kinetics Inc. / Installation Manual
Foreword
Use this installation manual to install
EnerWorks Pre-Heat Solar Water Heating Appliances
(product codes EWRA1, EWRA2, EWRA3 and EWRA4). This manual complements installation
training available through EnerWorks or approved distributors. EnerWorks training is mandatory
to become an EnerWorks authorized dealer.
EnerWorks encourages installers of EnerWorks products to always keep workmanship, best
practices and safety in mind. An organized installation will benefit both installer and end-user.
The
EnerWorks Solar Collector
is one of the highest rated in North America. This assessment
was carried out by third-party testing under the supervision and scrutiny of the Solar Rating and
Certification Corporation (SRCC). The
EnerWorks Solar Collector
has SRCC OG-100
certification and the
EnerWorks Residential Solar Water Heating Appliances
are certified to OG-
300 standards. This certification does not imply endorsement or warranty of these products by
SRCC.
The
EnerWorks Pre-Heat Appliance
is certified by the International Association of Plumbing and
Mechanical Officials (IAPMO) as meeting the standards of the Uniform Solar Energy Code
(USEC®). This certification does not imply endorsement or warranty by IAPMO.
The
Pre-Heat Appliance
described in this manual, when properly installed and maintained,
meets or exceeds the standards established by the Florida Solar Energy Center (FSEC), in
accordance with Section 377.705, Florida Statutes. This certification does not imply
endorsement or warranty of this product by the Florida Solar Energy Center or the State of
Florida.
The
EnerWorks Pre-Heat Appliance
is the first system in North America to achieve the
Canadian Standards Association (CSA) certification (CSA F379.1). This certification does not
imply endorsement or warranty by CSA.