Energizer eZV3200, User Manual

Page: 23 / 48

15
5.2) DC Applications
The DC receptacle, 15-30V under no-load condition, may be used for charging 12V
battery only. In DC operation, turn EcoMode to OFF.
NOTE
The DC receptacle can be used while the AC power is in use. If used at the same
time, be sure not to exceed the total power for AC and DC. (AC: 2.8kVA, DC: 5A)
■
Motor vehicles require more than their rated wattage when starting.
1. Disconnect the vehicle battery ground cable from the negative (-) battery
terminals.
2. Connect the DC outlet to the battery terminals using the included charging
cable. Connect red lead to positive (+) battery terminal and black lead to
negative (-) battery terminal.
3. Turn EcoMode to OFF, and start engine.
NOTE
■
Do not start the automobile engine when the generator is still connected to the
battery, this will damage the generator. System floating for DC output.
Disconnecting the charging cable:
1) Turn the power switch to STOP.
2) Disconnect the black lead from the negative (-) battery terminal, and the red lead
from the positive (+) battery terminal.
Ground
DC Charging Cable