ECO
Installation Instructions and Use & Care Guide
26
The piping used must be copper without seams of the refrigeration type (Cu DHP type according to standard
ISO1337)
DIAMETER OF THE PIPES
GAS (aspiration)
LIQUID (panel inlet)
mm / ft
Inches
Mm / ft
Inches
9,52 / 0.0303
3/8’’
6,35 / 0.0208
1/4’’
9.5.
CONNECTION TO THE PANNEL
a)
Prepare the copper pipe, removing the protective caps from the extremities.
b)
Place the extremities of the pipe upside down, cut the appropriate size of pipe and sand the rough
edge.
c)
Remove the females from the couplings in the panes and insert them in the pipe.
d)
Flange the pipe with the appropriate tool shaping a conic edge, make sure that there are no rough
edges or imperfections and that the vertical of the walls is uniform.
e)
Tighten the female coupling with your hands, turning it a few times. Then fully tighten applying a
torque in conformity with the table.
