ECO
Installation Instructions and Use & Care Guide
23
9.1.
ATTACHMENT SOLAR PANNEL
The nature of the site and the inclination angle where the panels are installed are important factors to take
into account. In order to benefit the most from the sunlight exposure, the panels should have a pitch
between 10º and 85 relative to the horizontal plane, and preferably oriented to the south.
The panel already comes with 6 holes for M8 in the lateral skirts. The distance between holes in the place
where the panel rests, should coincide with the holes made in the panel.
Attachment of L-shaped fastenings:
Attachment of L-shaped fastenings and panel:
[1]
Aluminium L-shaped fastening
[5]
Bolt M6x20
[2]
Plastic Bushing
[6]
Nut M6
[3]
Self-thread bolt M6x40
[7]
Panel
[4]
Washer M6
The system comes with a pack of six: L-shaped fastenings, bolts, females, washers, bushings.
It holds 3 small L-shaped fastenings (side A) and 3 large L-shaped fastenings (side B) that should be attached
as depicted in the picture. The desired pitch of the panel should be adjusted.
The profile should be attached to the base (e.g. rooftile) through a plastic bushing and a self-thread M6 bolt
which have been supplied.
The attachment of the panel to the L-shaped fastenings is done through M6 bolts and its females and
washers.
