Technical Manual
10
ECO
2.2.
Transport
The equipment must be carried in an upright position.
The equipment must be raised and lowered with extreme care, to avoid impact that
could damage the material.
Make sure the belts and/or transportation straps do not damage the material. Always
use suitable means to transport the material (pallet lift, forklift, etc.)
The transport of the equipment must be done with an inclination never exceeding 45º;
Both the packaging containing the water heater and the thermodynamic block must be
transported in an upright position and in the correct direction.
Horizontal transport or with the equipment turned upside down can cause serious
damage to the equipment.
The equipment must always be transported in its original packaging, to the point of installation. Check,
before starting the transport of the equipment, if the path you are going to take is unobstructed, in
order to avoid collisions that could prove damage to the device.
The packaging contains the following information symbols:
Fragile, handle with extreme caution
Keep the package dry
Make sure the arrows are always up
Do not stack packages
