Energetics POWER RUN 7.9 HRC, Manual

Page: 4 / 93

4
Safety Instructions
-
To protect the floor or carpet from damage, place a mat under the treadmill.
-
Turn off the power whilst the treadmill is not in use and remove the safety key.
-
In case of emergency please place both feet at the same time on the side reins.
-
To activate an emergency stop, please detach the safety key from the console.
-
Ensure that an area of 2000 x 1000 mm behind the treadmill is free from any obstacles.
-
This product is made for home use only and tested up to a maximum body weight of 120 kilograms.
-
We take no responsibility for personal injury or damage sustained by or through the use of this
treadmill.
-
The noise creation of treadmill is under 70 db.
-
The unit requires a power supply of 220V – 240V, 50/60 HZ.
-
The function of the immobilization method: the purpose of immobilizing the treadmill is to prevent
unauthorized use. This can be accomplished by removing the Safety Key from the console,
unclipping it from the cord and putting it in a non-accessible place.
-
The emergency dismount: Follow the steps listed below if you experience pain, feel faint or need to
stop your treadmill in an emergency situation:
1.) Grip handrails for support.
2.) Step onto the lateral platform.
3.) Pull the Safety key off the console.
-
The function of the emergency stop: The Safety Key functions as the emergency stop. In an
emergency situation, remove the Safety Key from the console and the treadmill will come to a stop.
Please always put the safety key to ON position and use the power switch to turn the machine
ON/OFF. The safety key is designed for emergency stop only and not to switch the treadmill
ON/OFF.
-
Noise compliance: This treadmill meets the requirements of the noise pollution standards.
-
Search for noisy parts: If you should notice unusual noises, like grinding, clacking etc. try to locate it
and have it repaired by a professional. Make sure the treadmill is not used until after repairs have
been made.