9
Maintenance Guide
ITEM
DAILY (Before Use)
DAILY (After Use)
WEEKLY
MONTHLY
3 MONTHS
6 MONTHS
Machine
Itself
Examine if the frame is
stable for exercise. Adjust
balancer to make it stably
positioned on the ground.
Use dry cloth to wipe
and clear sweat and
dust on the surface of
machine.
Use damp cloth to
clean. (Do not use
Solubility
Cleaners.)
Use water for plastic
parts. Use silicone oil
or wax for metal parts.
Location
Assure enough safe space
around the machine, and
make sure no dangerous
objects around.
Use wet cloth to clean
the ground. Do not put
wax on the ground.
Vacuum dust at the
bottom and around
the machine.
Check if they are well-
fixed and make sure no
breakdown on the
panel.
Power
Cable
Assure power cable is well-
plugged and not pressed by
the machine.
Turn off the power or
unplug power cable.
Check if all bolts are
firmly fastened and no
rusting.
Running
Belt
Assure no objects on the
belt, and run the machine
at 3~5 kph to see if the belt
drifts. Please refer to “
ALIGNING THE RUNNING
BELT” to adjust.
Use dry cloth to wipe
and clear the surface
of running belt.
Use dry cloth to Use
damp cloth to clean
(Do not use Solubility
Cleaners).
Running
Belt
Tension
Adjustment
Check if running belt is
slipping. Please refer to
“ADJUSTING
RUNNING
BELT TENSION” to adjust
it.
Lubrication
of Running
Belt
Use JK's lubricant
silicone
oil
to
lubricate whenever
reaching
180km.
Please
refer
to
“RUNNING DECK
LUBRICATION”.
The Inside
of Motor
Cover
Open motor cover
and vacuum all
dust.
Safety
Key
Turn the power on and
remove safety key to check
if it is in normal function.
Make sure safety key is
re-placed
on
the
console.
Lubrication Alert:
1.
The word of 'LUBE' will flash in every 3 seconds on the console once accumulated running distance reaches 180KM (or
360, 540,...) to remind user to do the maintenance.
2.
Press any button to jump out of the alert mode. Word of 'LUBE' will show up again whenever the machine re-starts if
the user doesn't eliminate the word by taking action of No. 3 as below.
3.
Press " STOP' & "SPEED Slow (-)" buttons at the same time to eliminate the word of 'LUBE', but distance will keep
accumulating.
Summary of Contents for POWER RUN 1060HRC
Page 84: ...84 Exploded drawing PR 1060HRC ...
