13
Training Computer SM 7270-31
BUTTON FUNCTION
UP
To select training mode and increase the function or value up.
DOWN
To select training mode and decrease function or value down.
ENTER
In stop mode, confirm all exercise data setting(Time, DST,CAL, Pulse, etc), and
enter into program.
RESET
Reset: In stop mode, press the button to back to main menu and
clear all set value.
Total Reset: At any time, hold the RESET key for 2 seconds, LCD full display 2s and
then back to home page.
START/STOP
To start or stop the system.
RECOVERY
If no pulse input, no use to press the mode. When pulse is displayed, press it to recovery. It
will
Display F1~F6 after 1minute, press it again to check out.
BODY FAT
Test body fat% and BMI.
DISPLAY FUNCTION
TIME
Workout time displayed during exercise.
Display range
0:00~99:59
; Setting range
0:00~99:00
minutes
SPEED
Workout speed displayed during exercise.
Range 0.0~99.9km/H
DISTANCE
Workout distance displayed during exercise.
Display range
0.00~99.99KM
; Setting range
0.00~99.99
KM
WATT
Workout power consumption.
Setting range 10~350;Display range 0 ~ 999
CALORIES
Burned calories during workout display.
Display range 0~999 ; Setting range 0~990
PULSE
Pulse BPM displayed during exercise;Alarm when over preset
target pulse.
Display range
30~230
; Setting range
0-30~230
RPM
Rotation (of flywheel) per minute.
Range 0 ~ 999
OPERATING PROCEDURE
1.POWER ON
When power on, buzzer sound for 1 second. At the same time, LCD full display 2 seconds (Drawing1) and
then wheel diameter (Drawing2). In 2 seconds, LCD display U1 (Drawing3).
Summary of Contents for CT 350
