- -
9
with Horizontal Seat Adjuster (10) into the top of the Seat Post.
Schritt 5
MONTAGE DER FUSSRASTER
Ein Pedal ist für die linke Seite und ein Pedal ist für die rechte Seite vorgesehen. Am Ende des Pedalgewindes finden
Sie ein „L“, für linkes Pedal und ein „R“ für rechtes Pedal.
Schrauben Sie das rechte Pedal (17) an der rechten Pedalkurbel (73) und das linke Pedal (18) an der linken
Pedalkurbel (74) fest.
Ziehen Sie die Pedale gut fest.
Step 5
FIT PEDALS
There is a Left and Right hand pedal. Check at the end of the thread for an ‘L’ or an ‘R’. Screw the Right Pedal (17) into
the Right Crank (73) and the Left Pedal (18) into the Left Crank (74). Tighten firmly.
Schritt 6
ANSCHLIESSEN DES COMPUTERS
Verbinden Sie die beiden Kabel mit dem Computer (75). Überprüfen Sie, ob die Kabel fest mit einander verbunden sind.
Schieben Sie anschliessend die Kabel durch das Loch in der Computer- Montageplatte in die Lenkerstütze, ohne die
Kabel dabei zu beschädigen.
Plazieren Sie schliesslich den Computer auf der Montageplatte und richten ihn aus. Schrauben Sie den Computer mit
vier Schrauben (68) gut fest.
Step 6
FIT COMPUTER
Connect both cables to Computer (75). Check the connections are joined correctly. Feed the excess cable through the
hole in the computer mounting plate so that the cables are not damaged.
Place the computer onto its mounting plate and align the holes. Fit 4 M5 x 13mm Phillips Head Screws (68). Tighten
firmly.
D
GB
D
GB
Summary of Contents for CT-1100
