![background image](http://html.mh-extra.com/html/energer/enf464com/enf464com_safety-and-operating-manual_2409714009.webp)
24V COMBI DRILL ENF464COM
Torque limiter
There is a clutch in your hammer drill. The torque limiter will actuate when a certain torque level is
reached. The motor will disengage from the output shaft. When this happens, the bit will stop turning. As
soon as the torque limiter actuates, release the trigger and remove the tool and bit immediately. This will
help prevent premature wear of the tool.
Important note
Be sure the supply is the same as the voltage given on the rating plate. Remove the mains plug / battery
pack before carrying out any adjustment or servicing.
Intended use
The machine is intended for driving in and loosening screws and bolts as well as for tightening and
loosening nuts within the respective range of dimension.
And it can be used to drill holes on wood, concrete or metal. When drill the hole in the steel, let the
machine in low speed (not full speed). Thus it can improve the drilling efficiency.