![background image](http://html.mh-extra.com/html/energer/enf464com/enf464com_safety-and-operating-manual_2409714007.webp)
24V COMBI DRILL ENF464COM
NOISE INFORMATION
Wear hearing protection!
Measured sound values determined according to EN 60745.
The noise figures quoted are emission levels and are not necessarily safe working levels. Whilst there is
a correlation between the emission and exposure levels, this cannot be used reliably to determine
whether or not further precautions are required. Factors that influence the actual level of exposure of
work-force include the characteristics of the work room, the other sources of noise, etc. i.e. the number of
machines and other adjacent processes, and the length of time for which an operator is exposed to the
noise. Also the permissible exposure level can vary from country. This information, however, will enable
the user of the machine to make a better evaluation of the hazard and risk.
VIBRATION
The European Physical Agents (Vibration) Directive has been brought in to help reduce hand arm
vibration syndrome injuries to power tool users. The directive requires power tool manufacturers and
suppliers to provide indicative vibration test results to enable users to make informed decisions as to the
period of time a power tool can be used safely on a daily basis and the choice of tool.
Further advice can be found at HYPERLINK "http://www.hse.gov.uk" www.hse.gov.uk
Vibration total values (triax vector sum) determined according to EN 60745:
Vibration emission value a
h,ID
=8.37 m/s
2
Impact drilling into concrete
Uncertainty K = 1.5 m/s
2
Vibration emission value a
h,D
= 2.59 m/s
2
Drilling into metal
Uncertainty K = 1.5 m/s
2
Vibration emission value a
h
= 0.436 m/s²
Screwdriving
Uncertainty K = 1.5 m/s
2
The declared vibration emission value should be used as a minimum level and should be used with the
current guidance on vibration.
The declared vibration emission been measured in accordance with a standardised test stated above
and may be used to compare one tool with another tool.The declared vibration emission value may also
be used in a preliminary assessment of exposure.
WARNING!
The vibration emission value during actual use of the power tool can differ from the declared value
depending on the ways in which the tool is used dependent on the following examples and other
variations on how the tool is used:
How the tool is being used and the materials being cut or drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles.
And the tool is being used as intended by its design and these instructions.
While working with this power tool, hand/arm vibrations occur. Adopt the correct working practices in
order to reduce the exposure to vibration.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.