Before you start
ENB542BDS
by ENERGER
Getting
started...
GB
16
IE
> Alternatively you can tighten the fixing handle (18) in a clockwise direction as
shown Fig. 5.
The fixing handle is spring loaded. Pull the fixing hanlde outward and rotate in
a counterclockwise direction. Release the fixing handle and allow it to engage
the thread. (Fig. 6)
Repeat the procedure until the working table is clamped.
> Insert and tighten the bolt (28) and wing nut (29) into the hole located in the
front edge of the work table.
> Unscrew the upper left hand hinge screw, attach the storage hook (31) and
resecure the screw with screwdriver. (Fig. 7)
> Always store the push stick (25) in position when not in use. (Fig. 8)
Fitting the push stick storage hook
Fig. 7
Fig. 8
Fig. 5
Fig. 6
0
10
20
18
1
0
10
20
40
45
2
18
31
25
