> The dial scale (19) of the table (20) must be fitted in the guide on the machine
frame. (Fig. 3)
> The work table (20) is capable of adjustment. Locate the guide on the machine
frame and make sure the work table locates into the guide.
> The fixing handle (18) is spring loaded.
> Pull the fixing handle (18) outward from the thread. This disengages the fixing
handle (18) from the thread. Located the flat washer M10 (30), offer the thread
to the hole and tighten the thread with the 4mm hex key. (Fig. 4)
15
ENB542BDS
by ENERGER
Before you start
Getting
started...
GB
IE
Fig. 3
0
10
20
30
40
45
20
Fig. 2
23
20
19
Fig. 4
45
40 35
30 25
30
18
