14
GB
IE
15
GB
IE
Getting started...
ENB520GRB by
Energer
ENB520GRB by
Energer
In
more
detail...
Care
and
maintenance
Trouble
shooting
Guarantee
EC declaration
of conformity
Operation
Recycling
and
disposal
GB
IE
In more detail...
GB
IE
In more detail...
Wet grinding
Dry grinding
Operation
15
16
23
23
24
25
> Hold the workpiece to be worked on with both the hands and support it on the
workpiece support.
> Press the workpiece with proper pressure against the grinding disc.
NOTE:
The machine is designed for rough and fine grinding.
The dry grinding disc is thus suitable only for rough grinding
(roughing).
> Refill water if required or allow excess water to flow through drain outlet. For this
pull out the rubber plugs (1).
> Hold the workpiece with both the hands and lower it down carefully on the
wet-grinding disc.
You may also support the workpiece on the teeth of the water container (2) and then
lower it down on the wet-grinding disc.
2
1
NOTE:
Grind only with water filled in water container in the
wet-cutting piece. Approx.1/3 of the wet-cutting disc should be
merged in water. Too high or too low water level may affect
the grinding result.
