Getting
FR
IE
Getting
started...
12
13
GB
IE
GB
IE
Getting started...
Getting started...
Install the spark guard
Mounting the bench grinder
Connection to the power supply
Install the workpiece support
ENB520GRB by
Energer
ENB520GRB by
Energer
Before you start
Before you start
> To fit the eye shields locate the nut, screw and washers provided through
the slot in the eye shield and hole on the grinding wheel guard and finger
tighten. Position the eye shield so it does not come in to contact with the
grinding wheel. Tighten the nut and screw to secure the eye shield in place.
> The workpiece support (2) must be assembled in such a way that the gap
between grinding disc and workpiece support is max. 3mm.
> The machine is to be assembled firmly on a suitable place. Four holes are
available to fix on a firm and solid base e.g. on a workbench or machine stand.
– Ensure that the mains connection is located not more than approx.
100–150cm from the place of fixation.
– The machine must be easily accessible from front and left side.
> Connect the plug with a suitable socket.
WARNING! Check the voltage! The voltage must comply with the
information on the rating label!
> Your product is now ready to be used.
WARNING! Do not use until the product has been
securely installed to a work bench.
WARNING! The adjustable safety plate (1) of the spark
guard must be assembled in such a way that the gap
between cutting disc and adjustable safety plate is max. 5 m
Max. 3 mm
2
≤5 mm
1
