8. CHARGE PROFILE
NOTE: You will require a formatted (FAT32) USB memory stick with a capacity of 1024KB or
larger.
1. Download and save the Battery Algorithm Listing from the download link www.enerdrive.
com.au/Algorithm/ePOWER-algorithm.xlsx
2.
Listing” tab in this spreadsheet.
3.
4.
5. Make sure the charger is NOT connected to the battery or AC power.
6. Unscrew the round cap covering the USB port on the front of the charger and insert the
USB memory stick.
7. Plug the AC power cord into the charger and switch ON AC power.
8. Please allow up to 1 min for programming. Programming is complete once USB status LED
is “SOLID”.
9. Switch OFF AC power to the charger.
10. Remove USB memory stick and screw USB cap back on.
11.
Battery Capacity LED’s. See user manual for explanation.
12. Switch OFF AC power to the charger.
13. Connect the charger to the DC battery.
14.
batteries please contact Enerdrive.
PLEASE NOTE:
Enerdrive ePOWER Industrial Battery Charger Owner’s Manual (Rev. 1.4)
Page 15
Summary of Contents for ePower Industrial EPI-2430
Page 1: ...Operation Owner s Manual 24V 36V 48V Models Rev 1 4...
Page 2: ......
