Enerblue PURPLE, User And Maintenance Manual

Page: 10 / 40

USER and
MAINTENANCE
MANUAL
10
6.2 SAFETY PROVISIONS
All the units are designed and built in compliance with the above mentioned directives, so as to ensure
maximum safety� Comply with the following provisions in order to prevent possible risks:
> this product contains pressurised parts, live components, moving mechanical components and sur-
faces at extreme temperatures that, in certain situations, can pose a risk: all maintenance must be
entrusted to qualified personnel with the necessary authorisation, in accordance with the regulations
in force� Before carrying out any operation, make sure that the appointed personnel has full knowledge
of the documentation supplied with the unit�
> Always have a copy of the documentation near the unit�
> The operations shown in this manual must be integrated with the procedures found in the user in-
struction manuals of the other systems and devices incorporated in the machine� The manuals contain
all the necessary information to handle the devices safely and the possible operating modes�
> Use the suitable protection (gloves, helmet, protective glasses, accident-prevention shoes etc�) for any
maintenance or control operation performed on the unit�
> Do not wear loose clothing, ties, chains, watches, etc�, which can get caught in moving machine parts�
> Always use tools and protective equipment in excellent state�
> There are very hot parts in the compressor compartment; be careful, therefore, when working in the
immediate vicinity not to touch any components of the unit without the necessary protection�
> Do not operate in the drain path of the safety valves�
> If the units are positioned in places that are not protected and can be easily reached by unqualified
persons it is mandatory to install suitable protections�
> The user is obliged to consult the installation and use manuals of the systems, incorporated and atta-
ched to this manual�
> There may be potential risks that are not evident� Warning and signs are therefore envisioned in the
machine�
> It is prohibited to remove the warnings�
It is forbidden to:
> remove or make safety guards ineffective;
> tamper with and/or modify, even partially, the safety devices installed on the machine
If an alarm is signalled and consequently the safety devices are activated, the operator must request the
immediate intervention of qualified maintenance technicians� Any accident can lead to serious injury or
death� The safety devices must be checked according to the guidelines found in the attached instruction
manuals� Verification and inspections must be performed by persons who are authorised in writing by
the employer� A copy of the verification results must be left on the machine or in its proximity� Any
accident can lead to serious injury or death� The manufacturer does not assume any liability for damage/
injury to persons, pets or objects deriving from the reuse of individual parts of the machine for functions
of assembly different to the original situation� It is prohibited to tamper with/replace one or more parts
of the machine without authorisation�
The use of accessories, tools or consumables other than those recommended by the Manufacturer
relieves the latter from civil or penal liability�
Machine decommissioning and demolition must be carried out by suitably trained and equipped
personnel�