2
Step 3:
Using the wall mount bracket as a template mark the four holes where you plan to install the radiator.
Drill four holes into the wall and hammer the supplied four M6*50 expansion bolts into the wall.
Step 4:
Unscrew the four nuts, spring locks washers and plain washers from the four expansion bolts. Keep them
for the next step.
Step 5:
Fix the mounting bracket over the four expansion bolts and tighten the four screws.
Step 6:
Position the sliding brackets at the middle of the heater. Install the mounting bracket behind the heater.
Tighten the four screws to the sliding brackets with the provided hexagonal key.
