0
4. Installation and Operation
Front view
Side view
1
Display
Remove protection foil after installation.
2
MODE
Selection of settings: CONTRAST, BRIGHTNESS, HUE, SATURATION, SHARPNESS and
VOLUME
3
Change of settings. Values can be increased or decreased, 0 ~ 00.
Selection of
AV1
or
AV2
4
POWER
ON/OFF switch
5
LED
Turns green if the monitor is switched on.
Turns off if no input receives a signal. (Power save mode)
6
OFF/ON
ON/OFF switch
7
DC IN
Power supply VDC / 500mA
8
AV
The jack
8
(AV) and
9
(AV) are audio and video inputs.
9
AV
Two cables with cinch connectors
(white = audio, yellow = video)
are supplied.
10
Speaker
At the rear side of the monitor.
2+3
Fixed Settings
The settings (contrast, brightness, colour, hue, saturation, sharpness, volume and the
position of the display on the screen) can be adjusted and stored.
To reset all settings: Press
MODE
and
▼
simutaneously.
3
5
4
1
2
3
6
7
8
9
6
7
8
9
