4
Note
The operational side of the camera is mounted in the housing.
Prepare the mounting site for installation.
Loosen the 4 Torx screws on the housing, but do not completely remove them, and
remove the cap.
B
Screw holes
Mark the position of the back of the housing
W
on the surface on which the device
is to be mounted. The screw holes
B
in the back of the housing
W
may be used as a
template.
W
Back of housing
Fix the back of the housing
W
on the desired surface (plug and cross-head screws are
enclosed) and feed through the cable. /3” or /” opening.
Note
When mounting on a ceiling, the camera must be installed within the housing.
G
Housing cap
Fasten housing cap
G
on the back of the housing.
Connection cable
After connecting the power supply and attaching the coaxial cable to an appropriate
monitor, the camera is operational.
K
Cable feed
/3” and /” socket. The /” high-strength cable gland is included in the accessori-
es. A dummy plug for the /3” socket is included.
Polarity of the DC plug
for all 12VDC cameras
5. Connection Assignment
The following connectors are mounted on the „eneo camera packages”, which are supplied with system cables
(video/DC):
Video output:
BNC jack (white)
Power supply:
Adapter bushing (green), for VDC/4VAC
4. Mounting the WDDG2 Housing
B
W
G
Wall / ceiling
K
Teflon
strip
