3
W
G
A
Wall / ceiling
K
2. General Description
• For ceiling and wall mounting
• Weatherproof and vandal-resistant design
• Clear Lexan Bubble with Inner Liner
• /3” CCD B/W or colour board camera with manual varifocal lens
• Automatic Shutter Control (AES)
• Automatic Gain Control (AGC)
• Back Light Compensation (BLC)
• Manual 3-axis Camera Adjustment
• Easy to mount for interior or exterior use
3. Mounting the WDDG1 Housing
Wall and ceiling mounting
Note
The operational side of the camera is mounted in the housing.
Prepare the mounting site for installation.
Loosen the 4 Torx screws on the housing, but do not completely remove them, and
remove the cap.
A
Screw holes
Mark the position of the back of the housing
W
on the surface on which the device
is to be mounted. The screw holes
A
in the attached plate and/or on the back of the
housing
W
may be used as a template.
W
Back of housing
Fix the back of the housing
W
on the desired surface (plug and cross-head screws are
enclosed) and feed through the cable. /3” or /” opening.
Note
When mounting on a ceiling, the camera must be installed within the housing.
G
Housing cap
Fasten housing cap
G
on the back of the housing.
Connection cable
After connecting the power supply and attaching the coaxial cable to an appropriate
monitor, the camera is operational.
K
Cable feed
Rubber washer for cable feed
