Eneo PNR-5216, Operating Instructions Manual, Page: 75 / 160

Network Video Recorder
67
Chapter 6
— Recorded Video Playback & Exportation
You can play back recorded video or export recorded video as a video clip.
First, check the following.

Devices should be added to a device group. Refer to
Chapter 11
— Device Management
(p. 87) for
details.

There should be recorded data in the allocated storage. Refer to
Chapter 13
— Storage Management
(p. 105) for details.
6.1 Playing back Recorded Video
1.
Search and playback of video recorded in the NVR system are supported in the Play panel (maximum 4)
and search and playback of video recorded in DVRs or SD (SDHC) memory cards inserted to network
cameras using the iNEX protocol are in the DVR Search panel (maximum 4). If the Play or DVR Search
tab is not on the tab panel, go to the
System menu, click New Tab and then Play or DVR Search .
2.
Click the Play or DVR Search tab on the tab panel → Select
a camera, device or device group from the
Site
list and drag
and drop it on the Play or DVR Search screen. Recorded
video from each camera is displayed on the screen. You
can move a camera screen to the desired location on the Play
or DVR Search screen without stopping the current playback
while playing back video. Select a camera screen and drag
and drop it on the desired location.
If a layout is registered on the NVR system, you can play video in the layout format by selecting a desired
layout from the
Layout
list and dragging and dropping it on the Play screen. Refer to
4.1 Monitoring
Video, Layout Monitoring, Registering Layouts
(p. 43) for details about the registration of a layout.
NOTES:

The system performance might seriously deteriorate when simultaneously monitoring or playing back video
with 1280x720 or higher resolution on more than one camera screen.

A
“layout” in this manual refers to a screen organization created by arranging specific cameras in a specific
screen format.