Eneo PNR-5216 Operating Instructions Manual Download Page 15

Page: 15 / 160

Network Video Recorder

Click the

Update

button at the bottom of the

Update Manager

screen. For a Client system with no

iNEX service program installed, clicking the

Update

button upgrades the Client program. For the NVR

system connects to the update service periodically and automatically upgrades if necessary.

1.6 Tuning On/Off the System

Pressing the power button on the front panel turn on the system and the iNEX program runs. Clicking

Shutdown

under the

System

menu in the iNEX Client program or pressing the power button on the front

panel while the system turns on will ask you to confirm turning off the system and the system turns off
when you confirm.

NOTE:

Connect a monitor before turning on the system. Video might not be displayed on the monitor when

connecting a monitor after turning on the system.

Summary of Contents for PNR-5216

































































































































































Eneo PNR-5216, Operating Instructions Manual, Page: 15 / 160

Search results

Summary of Contents for PNR-5216

Reviews: